Linear positioning
Linear Stages
Compact linear positioning with 10–50 mm travel across the range, including vertical elevation. Standard and high-vacuum versions.
PRECIBEO GO positioning systems
Compact piezo positioning systems
For research and industry
Move with nanometer-scale increments over centimeter travel. PRECIBEO GO combines walking-piezo drives, position feedback and modular components for precise positioning—including demanding vertical axes that must lift a payload and hold it when power is off.
GO HexStage 1 in motionExplore 6-Axis Stages
GO Elevation in motionExplore Linear Stages
GO TipTilt in motionExplore 3-Axis Stages
- Fine positioning
Nanometer-scale motion
- Vertical performance
Lift, move and hold
- Modular configuration
Single-axis to multi-axis
- High-vacuum options
Down to 10⁻⁴ Pa
Explore the GO range
Find the motion your application needs
Build your system around the required travel, payload, available space and operating environment.
Angular positioning
Rotation Stages
Fine angular positioning with unlimited rotation, closed-loop control and self-locking at rest.
Combine your axes
Multistage Assemblies
Combine linear, elevation and rotation stages for XY, XYZ and positioning systems with additional rotary motion.
Position and level
3-Axis Stages
Control motion along and around up to three axes for positioning, leveling and angular alignment.
Position and orient
6-Axis Stages
Adjust position and orientation with up to six axes for demanding alignment tasks.
Integrate your motion
Linear Actuators
Integrate walking-piezo motion into your own mechanism, with fine increments, centimeter travel and self-locking at rest.
Built for the Z axis
Fine motion with the force to lift
Vertical positioning requires a stage that can move the payload at the required speed and hold it securely at rest.
GO linear stages
0.5 kg
5 N version
≥5 mm/sMinimum lifting speed at rated payload
1 kg
10 N version
≥1 mm/sMinimum lifting speed at rated payload
2 nm sensor resolution and minimum incremental motion.
Self-locking when power is off.
Choose a low-profile GO-LS stage with a vertical mount, or GO Elevation with a flat moving top for direct mounting.
Explore Vertical PositioningComplete your system
Build a complete positioning system
Start with the axes you need. Combine compatible GO stages, add the required GO Controller, and select the mounts and accessories that fit your setup.
Operate your system with GO software or integrate motion control into your own application. High-vacuum versions are available for operation down to 10⁻⁴ Pa.
We help you select the stage, controller, cabling and mounting arrangement around your requirements.
GO in application
From laboratory alignment to instrument integration
GO stages and actuators address a wide range of precision positioning tasks, from standalone setups to motion integrated into larger instruments. The applications below illustrate just a few possibilities.
OEM imaging
Vertical objective scanning
In an OEM imaging instrument, a GO linear stage moves an objective vertically, combining fine positioning with the force needed to lift the objective.
University research
Photonics alignment
In a university photonics laboratory, GO XYZ and six-axis systems help align optical signals with waveguide chips.
Vacuum research
Positioning inside a chamber
High-vacuum GO stages provide sample and optical-component positioning in chamber setups requiring fine motion, centimeter travel and compatible cabling.
Instrument development
Motion within your own mechanism
GO linear actuators can add controlled motion to an existing mechanism when the mounting arrangement calls for an actuator rather than a complete stage.
Precibeo · Uppsala, Sweden
Developed, assembled and tested in Sweden
Precibeo brings piezo motor experience together with development, assembly and testing in Uppsala, Sweden.
We advise on configurations, support prototypes, adapt products and supply stages for repeat production. From an individual laboratory setup to integration into an instrument, we help you assess the motion requirements early in your project.
About PrecibeoLet’s find your configuration
Let’s find the right configuration
Tell us what needs to move, how far and how quickly—and whether it must operate vertically or in vacuum.
We can help select a suitable GO configuration and provide pricing and delivery information. You do not need to have selected a model before contacting us.
Email info@precibeo.com
or call +46 18 700 13 40